FAQ
LabelSoft Horizontal Printing Settings
LabelSoft horizontal printing settings The horizontal printing setting outputs horizontally displayed content as a vertical print. Design view: Print output: Use the horizontal setting in the driver or the driver-free setting in the software; the video demonstration is as follows: Video link: https://v.youku.com/v_show/id_XNDcyODYwOTgzNg==.html
ZMIN Barcode Printer Operation
1. Video: Installing ribbon and labels on a ZMIN barcode printer and laying out in the editing software Video link: https://v.youku.com/v_show/id_XNDMyNTI2MzQ2MA==.html Before using the printer for the first time, we strongly recommend watching the video tutorials on this page carefully and completely. 2. Video: Installing consumables and using an RFID label printer Video link:
ZMIN Built-in Wireless Network Card (WiFi) Setup and Usage Instructions
ZMIN barcode printer built-in wireless network card (WiFi) setup and usage instructions I. Setting the printer to AP (server) mode With the printer powered off, slide DIP switch number 6 down (see the figure below) and power on; after startup the printer is in AP (server) mode. Note: A WiFi printer takes about 30 seconds to start up. During startup, the Paper and Ribbon indicators flash simultaneously and the Ready indicator is steady; after startup the 3 indicators are steadily lit
ZMIN RFID Printer Usage Steps
Download this document: http://zmin.com.cn/uploads/asset/17b965b06c09.pdf I. Installing RFID labels and ribbon 1. Place the RFID labels into the media compartment (1) Gather all the label mounting accessories (2) Clip the roll spindle bushing onto the guide plate (3) Insert the roll spindle through the label core, with the spindle bushing facing inward (4) Push the guide plates in from both sides so the labels are centered; be careful not to
ZMIN RFID Label Printers Fully Support Reading IDs and Printing QR Codes
ZMIN RFID label printers fully support reading IDs and printing QR codes Note: Only ZMIN label printers with RFID functionality can use this feature correctly. A complete RFID read/write and print application: Read the ID of an HF NFC label, use that ID as part of a URL and write it to the label chip, and convert the ID into a QR code printed on the label. 1. First set the label format; if it is a round label
Steps for Replacing the Locking Buckle on a ZMIN Barcode Printer
Steps for replacing the locking buckle on a ZMIN barcode printer Please click here for the complete illustrated guide: http://www.zmin.com.cn/downloads/manual-x-series/ 1. Use a Phillips screwdriver to loosen the side cover screws (note that both the left and right side covers must be removed; each has one locking screw). 2. Press the clip inside the ribbon compartment and remove the left and right side covers. 3. Use needle-nose
C# Example of Calling the ZMIN Barcode Printer DLL for Printing
C# example of calling the ZMIN barcode printer DLL for printing VS2015+.Net 2.0 environment Includes normal printing, writing EPC, and reading TID before printing. Source code download: http://www.zmin.com.cn/downloads/sdk-all/
EPL (Yiyuyan) Example of Calling the ZMIN Barcode Printer DLL for Printing
EPL (Yiyuyan) is a programming language that uses Chinese as its programming code; it is known for being "easy", and its founder is Wu Tao. An early version of EPL was named E Language. The earliest version can be traced back to September 11, 2000. The original purpose of creating EPL was to practice programming in Chinese, so that Chinese people could write programs with Chinese thinking without having to learn Western thinking. The birth of EPL greatly lowered the threshold for programming and the difficulty of learning.
ZMIN Automatic Peeler Installation and Usage Instructions
ZMIN barcode printer automatic peeler installation and usage instructions 1. For desktop barcode printers, only the X series can be equipped with an automatic peeler (peeler base). 2. Automatic peeler appearance: 3. Installing the automatic peeler: (1) Remove the tear bar base and route the automatic peeler's cable through the square hole at the lower right of the platen roller in the printer's middle housing. (2) Insert the peeler into the printer's middle housing and make sure the peeler cable is not pinched or caught. (3)
ZMIN Ethernet Barcode Printer Development Example
Since the release of the ZMIN barcode printer network card accessory, quite a few users have been using it. If you print with label editing software or IE, etc., you can use it very easily by referring to our previous [Setup Document]. It is also very convenient if developers write their own programs. First set the printer's IP address (using the ZMTool utility), then establish a Socket connection and send print commands. The core code is as follows (C#
Introduction to RFID Technology
RFID stands for Radio Frequency Identification, meaning radio frequency identification. RFID is a communication technology that can identify specific targets and read and write related data through radio signals without establishing mechanical or optical contact between the identification system and the specific target. The most important advantage of RFID systems is non-contact identification: it can penetrate snow, fog, ice, paint, dust and other harsh environments where ordinary barcodes cannot
Introduction to Inlay
Inlay is a term specific to the RFID industry, referring to a pre-laminated product made of multiple layers of PVC or other materials containing a chip and coil laminated together; through different forms of packaging, different types of RFID labels can be made. Inlay can be understood as an unencapsulated semi-finished RFID label. Inlay is divided into Dry Inlay and Wet Inlay. Dry I