FAQ
Setup Wizard for Using the ZMIN X1i Printer Driver in BarTender
Cause 1. BarTender software can correctly recognize the 200DPI printer driver, but cannot correctly recognize the 300DPI printer driver. The symptom is that when editing barcodes with the 300DPI printer driver, the minimum value for the "Size" setting is 0.13mm, while the correct minimum value should be 0.08mm. 2. BarTender software defaults the "Print Technology" of the Seagull 300DPI driver
How to Print Korean and Japanese in XLabel
If garbled characters appear when printing Korean or Japanese with XLabel, make the following settings (using printing Korean under Win7 as an example): Open Control Panel -> Clock, Language, and Region -> Change keyboards or other input methods -> Administrative -> Language for non-Unicode programs. Click "Change system locale" and set the current system locale to "Korean (Korea)", then click OK and restart the computer.
X Series Barcode Printer Operation Video Demonstration
1. Demonstration of installing the ribbon and paper roll on a ZMIN barcode printer, installing the driver and barcode label printing software, and using the barcode label printing software to design and print labels. >>>>Click to watch <<<< Before using the printer for the first time, it is strongly recommended to watch this video tutorial carefully. 2. Setting the label page size in the ZMIN XLabel barcode editing software. >>>>Click to watch <<<< 3. ZMI
The FAQ has multiple pages; please use the pagination at the lower right of this page
The FAQ has multiple pages; please use the pagination at the lower right of this page
ZMIN Barcode Printer Quick Start Guide
Please click the file below: ZMIN Barcode Printer Quick Start Guide.pdf If it cannot be opened, please install PDF reading software first: Adobe Reader or Foxit PDF Reader (Foxit Reader)
How to Delete the ZMIN Barcode Printer Driver on WinXP
Click "Start" -> "Printers and Faxes". In the "Printers and Faxes" window, find the printer icon. (This article uses the ZMIN X1 barcode printer as an example; the operation for other printer models is similar.) In the "Printers and Faxes" window, right-click the "ZMIN X1" icon and select the "Delete" menu item. If the printer icon still exists after confirming deletion, right-click the "Z
Troubleshooting Common ZMIN Barcode Printer Problems
Problem 1: No printing, i.e. when printing is clicked on the computer, the printer does not respond and the indicator lights show normal. Analysis and troubleshooting: If the printer indicator lights show normal, it is generally not a device problem; the most likely cause is that the print data was not sent to the printer. 1. Check whether the printer selected in the editing software is correct. If multiple drivers are installed on the computer, such as ZMIN X1, ZMIN X1 (Copy 1), ZMIN X1
ZMIN X Series Barcode Printer Ribbon Installation Demonstration
Note: 1. The ribbon is only required in thermal transfer mode; printing on thermal paper labels does not require a ribbon; 2. The ribbon you use must be ink-side-out (Ink side: Out); 3. When the ribbon width is less than 110 mm, place the ribbon in the center of the ribbon core adapter according to the scale on the adapter. Installation steps: 1. Press and hold the top cover latch buttons on both sides and lift open the printer top cover; 2. Pull the locking buckles on both sides
ZMIN X Series Barcode Printer Label Paper Installation Demonstration
Installation steps: 1. Press and hold the top cover latch buttons on both sides and lift open the printer top cover to expose the paper roll compartment; 2. Take out the paper roll spindle and put the paper roll onto it (if it is a 3-inch large-core paper roll, fit the paper roll spindle adapter onto the paper roll flanges), slide the two paper roll flanges onto the spindle from both sides with the smooth side facing the paper roll; 3. Put the spindle together with the paper roll back into the paper roll compartment, center the paper roll according to the scale marks on the spindle, and press the two flanges against the paper roll
How to Install the ZMIN Barcode Printer Driver on WinXP
(Using Windows XP SP3 with a ZMIN X1 as an example; other models are similar.) First connect the USB cable and power cable of the ZMIN barcode printer (note that the printer power button should be in the off state before connecting the cables), then turn on the printer power switch. Windows will automatically detect the new device and the "Found New Hardware Wizard" interface will appear: Put the CD supplied with the printer into the computer's optical drive and click "Next"
XLabel Installation Tutorial
Put the CD supplied with the ZMIN barcode printer into the computer's optical drive, open the "X Label" directory -> "Chinese Installation", and double-click "Setup.exe" to run it. Click "Next" and select the software installation directory; if no change is needed, just click "Next". Click "Install" to start copying the program. After copying is complete, a message will appear saying the parallel port dongle driver cannot be installed; ignore it, click "OK", and then complete
How to Change the Printer in XLabel
After opening the X Label editing software, the currently used printer is displayed in the lower left corner of the interface, as shown above as "ZMIN X1 (203 dpi)". If you need to change to another printer model, such as ZMIN X1i, proceed as follows: Click "Label Settings". In the "Printer" option in the Label Settings interface, change the printer name to switch to another printer. Change complete.